Sunroof initialisation

Sunroof initialisation

1. Turn sunroof opening control to closed position
2. Press sunroof opening control. After 3 seconds, the sunroof moves to the locked torque closed position and opens again by a few millimetres to the normal closed position.
3. Release the sunroof opening control in under 5 seconds - the sunroof is then initialised.
4. Apply a short press (under 2 seconds) to the sunroof opening control and release it.
5. Again, press the sunroof opening control in under 5 seconds and maintain pressure.  After 4 seconds the roof opens partially and then closes.  Release the pressure when the sunroof is closed.
6. The sunroof becomes operational (Sunroof initialised: Learning process completed: Auto-programing operational)