Doors Reset

This can be necessary after battery disconnection or when something has restricted the motion of one of the doors: often accompanied by a series of bleeps.
  1. Gearbox in neutral - start the engine.  (the reason for this is to raise the battery voltage from 12.3 volts with engine off - to around 14.3 volts with the engine running).
  2. Fully open faulty door by hand (use just enough force to get the door moving). The doors are quite heavy and require a good tug but will move the whole length of the runners until a definite 'stop' is felt.
  3. Fully close door by hand, again they are quite heavy but can be closed up until the contacts on the front of the door connect.
  4. Turn off ignition.  Doors should now operate normally.